Mfg. Of Extruded & Moulded Rubber Parts From Silicone, Viton, Neoprene, Nitrile, EPDM, Dry Heat Sterilizer Gaskets, Autoclave Gaskets, Tray Dryers Gaskets, Vacuum Dryers Gaskets, O Ring Of Pressure Vessels, Filter Press Gaskets, F.B.D.Gaskets, Shifter Coupling Gaskets, Mebrene Holding O Rings, Pipeline Liquid Gaskets, T.C.Gaskets, Silicone Sheets etc Mfg. Of Extruded & Moulded Rubber Parts From Silicone, Viton, Neoprene, Nitrile, EPDM, Dry Heat Sterilizer Gaskets, Autoclave Gaskets, Tray Dryers Gaskets, Vacuum Dryers Gaskets, O Ring Of Pressure Vessels, Filter Press Gaskets, F.B.D.Gaskets, Shifter Coupling Gaskets, Mebrene Holding O Rings, Pipeline Liquid Gaskets, T.C.Gaskets, Silicone Sheets etc

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

 

Rubber Oil Seal

 
Rubber Oil Seal

Description : We manufacture high quality oil seals, hydraulic oil seals, hydraulic piston seals with high tolerance and resistance to corrosion. These are mechanical seal for deformation under pressure, high temperature and wear. Designed to perfection, the oil seals can be easily installed and provides years of hassle free life. 

Material : NBR, VITON and HNBR.

Feature : Rubber Coated with metal case or spring, high mechanical strength, sealant and rusty resistance.

Application : Hydraulic seals, vacuum seals, seals ,engine -motor shaft, transmission seals.


 
Each seal (or gasket) can be classified into one of two types with regard to the motion acting relatively upon it. 

Static Seals :
When there is very little or no motion of the mating assembly parts upon the seal, a static condition exists. Usually just an initial compression or periodic (open and close) compressions, this type of seal; i.e. a liquid seal in a hose joint, a door seal on a home.

Design Considerations are rather straightforward.
  • When compressed, as with an O-ring or face gasket, pressure acts in essentially a vertical direction relative to the face, squeezing between two opposing surfaces to eliminate gaps.
  • Outward expansion results in the horizontal direction as a pressure relief, and this profile change needs to be accommodated in the mounting surface design.
  • Compression forces need to be assessed. Various design elements can be introduced if too high; i.e., lower durometer, hollow shapes, sponge/foam and/or thin walls.
  • Recommended compression range is 10% - 30%, and no more than 50%.
Dynamic Seals :
Where repeated motions act upon the seal as in a circumferential,axial or angular direction, a dynamic condition exists. Repeated actions upon the seal, either regularly or periodic, this type of seal; i.e. a piston ring seal or shock absorption mechanism.

Design Considerations are more complex than static seals, primarily resulting from the changing stress levels. In addition to the static seal considerations, the environment may require:
  • Abrasion resistance becomes important and is affected by the mating surface finishes.
  • Recovery speed after compression to the original released height.
  • Compression set, or the percentage of relaxation of the dimensions versus the original uncompressed dimensions
  • Temperature changes, thermal cycling.
  • Distortion: squeeze, stretch - ability to recover.
  • Physical strength: tensile strength, tear resistance.
 
 
Moulded Rubber Products : Medical Surgical Rubber Products    |   Din and SMS    |   Food Grade Bellow    |   Rubber Coupling
Silicon Rubber Cap   |   Triclover Gasket   |   Inflatable Gasket    |   Sterilizer Gasket   |   Flange and Glass Gasket
     
Hydraulic And Pneumatic
Rubber Products
: Rubber 'O' Ring    |   Rubber Oil Seal    |   Cup Packing Seal    |   Chevron Packing Seal    |    TDUO Seal
Piston Guide Rings   |   Wiper Seal    |   Piston Seal
     
Industrial Rubber Products : Rubber Bellow   |   Rubber Spacer   |   Silicone Rubber Sheet    |   Butterfly Valve Diaphragm    |   Rubber Roller
VD & VOD Sealing Ring    |   Fiber Sealing Gasket    |   Diaphragm Value    |    Conductive Pad   
Rubber Muff / Flap    |   Metal Bonded Part    |   Jet and Beam Dying Gasket
     
Extruded Rubber Products : Rubber Hoses   |   Wire And Cable   |   Extruded Profile   |   Strips & Chords    |   Sponge Tube    |    Rubber Tubing Elastomer Tubing
 
Home    |      Profile     |   Products    |   Contact  |   Enquiry